• Sale!

    Pentair Pentek EP-10 Carbon Block 5 Micron

    $31.90 $8.80

    LAST STOCK | Pentair Pentek EP-10

    The Pentair Pentek EP-10 Carbon Block Cartridge is the ideal choice for a wide range of home, food service, commercial and industrial applications.

    Size – 10″x2.5″
    Rating – 5 Micron Nominal
    Filter Media – Bonded PAC
    Endcaps – Polypropylene
    Outer Wrap – Polyolefin Netting – Polyethylene
    Gaskets – Buna-N

    Manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximising the utilization of the carbon while maintaining low pressure drop.

    This cartridge is protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.

    Add to cart Show details
  • Pentek Big Blue O-Ring


    Replacement Big Blue O-Ring to suit Pentek and Omnifilter Big Blue Housings (151122)

    Add to cart Show details
  • Pentek DFX-CB-20BB

    Pentek DFX-CB-20BB Carbon Block and Polyspun Dual Filter


    Pentek DFX-CB-20BB

    Pentek DFX-CB-20BB Micron Rating: 10 Micron
    Change Frequency: 6-12 months
    Endcaps: Polypropylene
    Gaskets: Buna-N
    Temperature Rating: 5°C – 50°C
    Dimensions: 4.63″ x 20.035″ (117.60 mm x 508.89 mm)
    Initial Pressure Drop: 1.0psi @ 4.0 gpm (0.07 bar @ 15.14 Lpm)
    Exterior Filter Media: Polypropylene polyspun
    Interior Filter Media: Carbon block
    Chlorine Reduction: 30,000 gal @ 4.0 gpm (113,562 L @ 15.14 Lpm)

    Pentek DFX Series Diamond Flow filters bring two filters into one. On the outside, a polyspun sediment pre-filter. On the inside, a 10 micron carbon block taste, odour and colour filter.

    You can use the Pentek DFX-CB-20BB filter in many ways. You could reduce a twin bowl system down to just one bowl, saving wall space. Or you could prolong the life of your twin system by using this DFX filter as your carbon block second cartridge.

    Whatever way you use it, you can be certain it carries the quality you can expect from a Pentair filter.

    Add to cart Show details
  • Pentek DGD-5005-20

    Pentek DGD 50-05 Micron Gradient Density Pre-Filter 20″ BB


    Pentek DGD5005-20

    Dimensions: 4 1/2″ x 20″
    Temp. range: 5-60 Degrees C
    Capacity: 30,000 Litres
    Flow Rate: 75 LPM @ < 1 psi
    Rating: 50 micron pre-filter / 5 micron post filter
    Pentek DGD-5005-20 reduces sand, dirt, silt, rust, scale particles

    Pentek DGD Series Cartridges are manufactured from 100% pure polypropylene and are sized for use in Big Blue Filter Housings.

    DGD Series Cartridges are designed for purity and will not impart taste, odour or colour to the liquid being filtered. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.

    The DGD Series’ advanced design combines selective final filtration with appropriate pre-filtration to achieve up to three times the dirt holding capacity of similar size sediment cartridges and even greater capacity than standard spun or string-wound cartridges. The larger diameter of the filter reduces the particle load, allowing it to operate at higher velocities. The effective filter depth is increased to a full 233%. This increased depth provides very high particulate reduction efficiencies and added loading capacity.

    The design and performance characteristics of the DGD Series Cartridges make them an excellent choice for all residential, rural, municipal and commercial applications.

    Add to cart Show details
  • Sale!

    Pentek R30 Sediment Filter Cartridge

    $13.20 $4.40

    LAST STOCK | Pentek R30

    The Pentek R30 is a 30-micron pleated polyester filter cartridge and fits 10″x2.5″ standard filter bowl housings. Ideal for general sediment reduction and pre-filtering for carbon filters. Can be used on mains water or tank water.

    Add to cart Show details
  • Mounting Bracket

    Wall Mounting Bracket | Big Blue Housings


    Wall Mounting Bracket for Big Blue Housings. Side hanging/holding style bracket that suits all housing types including those with a bypass built into the cap (e.g. BF55).

    Add to cart Show details
  • Big Blue Wrench

    Wrench Pentek Big Blue (SW-4)


    SW-4 Big Blue Bowl Wrench to suit Pentek and OmniFilter Big Blue Housings

    Suits BF55 Housing

    Add to cart Show details